 |
|
|
|
|
   |
| NAME: Material introduction |
|
| Product Description: |
Processing material description
SS400
SS400 low-carbon steel (iron) belongs to the general structural steel. The carbon content of SS400 is not specified in the JIS standard, and is usually between 0.15% and 0.20%. Because the carbon content is low, the steel hardness is soft, and it is not recommended for use in high-strength, high-resistance steels. The main components of the grinding or hardness assurance, the welding properties are good, commonly used in welding structural parts, screws, nuts, small parts, automotive parts, mechanical parts and so on.
SS400低碳鋼(鐵)，屬於一般結構用鋼材。SS400的含碳量在JIS標準中並沒有一定的規範，通常約在0.15% - 0.20%之間，也因為含碳量低，所以鋼質硬度較軟，不建議使用於使用於高強度、耐磨或硬度保證的主要部件上，焊接性質良好，常用於焊接結構用零件、螺絲、螺帽、小零件、汽機車零件、機械零件等。
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
SS400
S20C |
A36
SAE 1021 |
- |
Q235 |
SS400 |
- |
Specification table
SS400
Mild Steel |
Outer diameter specification (mm) |
|
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
|
22 |
23 |
24 |
25 |
26 |
27 |
28 |
30 |
32 |
more |
S45C
S45C medium-carbon steel belongs to carbon-containing carbon structural steel. It is widely used steel and has a wide range of uses. Has good strength and toughness, processing turning and good performance advantages, mechanical properties after heat treatment is good, but the lower welding performance of carbon steel is poor. It is commonly used in bolts, nuts, screws, crankshafts, connecting rods, worms, drive shafts, spindle barrels, motor shafts, gears, structural parts, automotive parts, and mechanical parts.
S45C中碳鋼，屬於中含碳量碳素結構鋼材，為普遍使用之鋼種，用途十分廣泛。擁有良好的強度與韌性、加工車削性能良好等優點，熱處理後機械力學性能良好，但焊接性能較低碳鋼差。常用於螺栓、螺帽、螺絲、曲軸、連桿、渦桿、傳動軸、主軸套桶、馬達軸心、齒輪、構造零件、汽機車零件、機械零件等。
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
S45C |
1045 |
CK45 C45
(1.0503) |
45 |
S45C |
C45
C45E4 |
Specification table
S45C
medium carbon steel |
Outer diameter specification (mm) |
|
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
|
22 |
23 |
24 |
25 |
26 |
27 |
28 |
30 |
32 |
more |
SUJ2
SUJ2 is a high-carbon, high-chromium alloy steel with good overall performance, high hardness and uniformity after quenching and tempering, and high wear resistance and contact fatigue strength. Good hot workability, good workability after spheroidizing annealing. Suitable for manufacturing bearings, roller shafts, dies, guide posts, guide bushes, rollers, balls, and various mechanical parts.
SUJ2為高碳高鉻合金鋼，綜合性能良好，淬火和回火後硬度高而均勻，耐磨性、接觸疲勞強度高。熱加工性好，球化退火後有良好的可加工性。 適合製造軸承、輥軸、模具、導柱、導套、滾筒、滾珠及各種機械零件。
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
SUJ2 |
52100 |
100Cr6
(1.3505) |
GCr15 |
SUJ2 |
- |
Specification table
SUJ2
Bearing steel |
Outer diameter specification (mm) |
|
16 |
19 |
22 |
25 |
28 |
30 |
32 |
34 |
36 |
38 |
|
40 |
42 |
44 |
46 |
48 |
50 |
55 |
60 |
65 |
more |
SCM415
SCM415 is a low-carbon alloy structural steel (lower in carbon content than SCM420) and is suitable for carburizing heat treatment. After the carburizing, the hardness of the surface layer of the steel is increased, so that the wear resistance is improved. However, the central part still maintains the toughness and can withstand the impact and load. Often used in the motor shaft, spindle, mechanical parts, pistons and gears and other special wear and load of the workpiece.
SCM415為低碳合金結構鋼(碳含量較SCM420低一些)，適合進行滲碳熱處理，滲碳後鋼材表層硬度提高，使耐磨性提升，但中心部位依然保有韌性，更能承受衝擊與荷重。常應用在馬達軸心、主軸、機械零件、活塞及齒輪等各種特殊耐磨與荷重的工件。
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
SCM415 |
- |
15CrMo5
(1.7262) |
15CrMo |
SCM415 |
- |
Specification table
SCM415
Green cross steel
Chromium molybdenum steel |
Outer diameter specification (mm) |
|
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
|
23 |
24 |
25 |
26 |
27 |
28 |
30 |
32 |
34 |
more |
SCM420
SCM420 is a low carbon alloy structural steel that is suitable for carburizing heat treatment. After the carburizing, the hardness of the surface layer of the steel is increased, so that the wear resistance is improved. However, the central part still maintains the toughness and can withstand the impact and load. Often used in the motor shaft, spindle, mechanical parts, pistons and gears and other special wear and load of the workpiece.
SCM420為低碳合金結構鋼，適合進行滲碳熱處理，滲碳後鋼材表層硬度提高，使耐磨性提升，但中心部位依然保有韌性，更能承受衝擊與荷重。常應用在馬達軸心、主軸、機械零件、活塞及齒輪等各種特殊耐磨與荷重的工件。
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
SCM420 |
- |
25CrMo4
(1.7218) |
20CrMo |
SCM420 |
- |
Specification table
SCM420
Green cross steel |
Outer diameter specification (mm) |
|
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
|
23 |
24 |
25 |
26 |
27 |
28 |
30 |
32 |
34 |
more |
SCM440
SCM440 is a high-toughness alloy structural steel. It is a commonly used steel grade for producing high-strength workpieces. Chromium (Cr) and molybdenum (Mo) are added. It has stable product composition, high steel purity, small decarburization layer, and low cold cracking cracking rate. , Heat treatment quality, stability, hardness, good quenching and other advantages, widely used in the bolt, shaft, rod, guide column, spindle barrels, gears, steam turbines and other components to be tough and tough parts.
SCM440為高韌性合金結構鋼，是生產高強度工件的常用鋼種，加入鉻(Cr)、鉬(Mo)元素，具有產品成分穩定、鋼質純淨度高、脫碳層小、冷鐓開裂率低、熱處理質量穩定、硬度均勻、淬火性好等優點，廣泛應用在螺栓、軸心、桿、導柱、主軸套桶、齒輪、汽機車零組件等須強韌性之工件。
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
SCM440 |
4140 |
42CrMo4
(1.7225) |
42CrMo |
SCM440 |
42CrMo4 |
Specification table
SCM440
Red Cross Steel
Chromium molybdenum steel |
Outer diameter specification (mm) |
|
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
|
23 |
24 |
25 |
26 |
27 |
28 |
30 |
32 |
34 |
more |
SNCM220
SNCM220 is a kind of commonly used low carbon alloy carburizing steel with nickel (Ni), chromium (Cr) and molybdenum (Mo) added. After carburizing heat treatment, the surface has high hardness, abrasion resistance and contact fatigue strength, but at the same time The heart also retains good toughness and can withstand high impact loads. Mainly used as impact-resistant and wear-resistant workpieces for automotive bearings, spindles, gears, and mechanical parts.
SNCM220是一種常用的低碳合金滲碳鋼，加入鎳(Ni)、鉻(Cr)、鉬(Mo)元素，滲碳熱處理後表面具有相當高的硬度、耐磨性和接觸疲勞強度，但同時心部還保留良好的韌性，能承受高的衝擊負荷。主要用作汽車軸承、主軸、齒輪、機械配件等耐衝擊、耐磨損的工件。
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
SNCM220 |
8620 |
21NiCrMo2
(1.6523) |
20CrNiMo |
SNCM220 |
20NiCrMo2 |
Specification table
SNCM220
White cross steel
Nickel chromium molybdenum steel |
Outer diameter specification (mm) |
|
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
22 |
24 |
|
25 |
26 |
28 |
30 |
32 |
34 |
36 |
38 |
40 |
more |
SNCM420
SNCM420 is a common low carbon alloy carburizing steel, adding nickel (Ni), chromium (Cr) and molybdenum (Mo) elements. The surface of carburizing heat treatment has quite high hardness, wear resistance and contact fatigue strength, but at the same time the heart still keeps good toughness and can withstand high impact load. It is mainly used as shock resistant and wear-resistant materials for automobile bearings, spindles, gears, mechanical fittings, etc.
SNCM420是一種常用的低碳合金滲碳鋼，加入鎳(Ni)、鉻(Cr)、鉬(Mo)元素，滲碳熱處理後表面具有相當高的硬度、耐磨性和接觸疲勞強度，但同時心部還保留良好的韌性，能承受高的衝擊負荷。主要用作汽車軸承、主軸、齒輪、機械配件等耐衝擊、耐磨損的材料。
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
SNCM420 |
4320 |
- |
20CrNi2Mo |
SNCM420 |
- |
Specification table
SNCM420
White cross steel
Nickel chromium molybdenum steel |
Outer diameter specification (mm) |
|
17 |
18 |
20 |
22 |
24 |
25 |
28 |
29 |
30 |
32 |
|
34 |
36 |
40 |
42 |
46 |
48 |
55 |
60 |
65 |
more |
SNCM439
SNCM439 has good strength and tensile strength in nickel-chromium-molybdenum alloy steel. It has good hardening properties, high toughness, high wear resistance and impact resistance. It is widely used in drive shafts, spindles, gears, mechanical parts, A variety of toughness structural workpieces such as a shaft, a tool, and a scroll.
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
SNCM439 |
4340 |
40NiCrMo6 |
40CrNiMoA |
SNCM439 |
- |
Specification table
SNCM439
Blue cross steel
Nickel chromium molybdenum steel |
Outer diameter specification (mm) |
|
13 |
16 |
19 |
22 |
25 |
27 |
28 |
30 |
32 |
34 |
|
36 |
38 |
40 |
42 |
44 |
46 |
48 |
50 |
55 |
more |
SACM645
SACM645 is a steel for nitriding and is used in high precision mechanical parts. Aluminum (Al) and chromium (Cr) alloy elements are added to the steel to achieve high surface hardness, wear resistance and fatigue strength after nitriding heat treatment. They are commonly used in cylinder liners, compressor parts, hydraulic parts and the like.
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
SACM645 |
7140 |
41CrAlMo7
(1.8550) |
38CrMoAl |
SACM645 |
41CrAlMo74 |
Specification table
SACM645
Black cross steel
Aluminum chrome molybdenum steel |
Outer diameter specification (mm) |
|
36 |
38 |
40 |
42 |
46 |
50 |
55 |
60 |
65 |
70 |
|
75 |
80 |
85 |
90 |
100 |
110 |
120 |
130 |
140 |
more |
SKD11
SKD11 belongs to advanced cold room and cold work tool steel. It has extremely high hardness and good toughness. It is added with alloying elements such as chromium (Cr), molybdenum (Mo) and vanadium (V), so it has wear resistance, deformation resistance and impact resistance. characteristic. Commonly used in various cold working molds, such as stamping die, punching die, deep die, screw head cold die, shearing knife, punch and so on.
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
SKD11 |
D2 |
X165CrMoV12
(1.2601) |
Cr12MoV |
SKD11 |
- |
Specification table
SKD11
Cold mold steel |
Outer diameter specification (mm) |
|
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
|
18 |
19 |
20 |
22 |
24 |
25 |
26 |
28 |
30 |
more |
SKD61
SKD61 belongs to the mold tool steel. It has high hardness and wear resistance after heat treatment, and has the characteristics of strong hardenability and thermal fatigue resistance. In addition to being able to withstand large mechanical stresses, the SKD61 can withstand the thermal stresses generated by repeated work. Suitable for the production of cutting tools (drilling tools, circular knives, scissors, etc.), cold/hot working dies and measuring tools, can also be made into pistons, engine fuel pump seats, cylinder sleeves, punches, drills High-temperature processing special tools such as hole machines
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
SKD61 |
H13 |
X40CrMoV51
(1.2344) |
4Cr5MoSiV1 |
SKD61 |
- |
Specification table
SKD61
Hot die steel |
Outer diameter specification (mm) |
|
8 |
10 |
11 |
12 |
13 |
14 |
16 |
19 |
20 |
22 |
|
24 |
25 |
26 |
28 |
30 |
32 |
34 |
36 |
38 |
more |
SKH51
SKH51 high-speed tool steel, the main characteristic is red heat hardness, which means that it can maintain high hardness and wear resistance under high-speed cutting and high heat (400~500 °C). The reason is to add chromium (Cr) to steel. ), molybdenum (Mo), vanadium (V), tungsten (W) and other special elements. Often used in the manufacture of a variety of cutting tools. Such as turning tools, drill bits, hobs, machine saw blades, wear-resistant parts and high-demand molds.
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
SKH51 |
M2 |
S6-5-2
(1.3343) |
W6Mo5Cr4V2 |
SKH51 |
HS6-5-2 |
Specification table
SKH51
High speed steel |
Outer diameter specification (mm) |
|
5 |
6 |
8 |
9 |
10 |
11 |
13 |
14 |
15 |
16 |
|
17 |
18 |
19 |
20 |
22 |
23 |
24 |
25 |
26 |
more |
17CrNiMo6
17CrNiMo6 gear steel is a German industrial standard grade steel, alloy carburized steel, adding nickel (Ni), chromium (Cr), molybdenum (Mo) elements, suitable for high strength, high load, high toughness parts, carburized After treatment, the surface has good wear resistance and is often used for components such as gears and spindles. The European standard is 18CrNiMo7-6. (This steel grade has been subjected to spheroidizing annealing treatment and has good processing properties)
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
- |
- |
17CrNiMo6
(1.6587) |
- |
- |
- |
Specification table
17CrNiMo6
Gear steel |
Outer diameter specification (mm) |
|
60 |
70 |
90 |
110 |
130 |
|
|
|
|
|
SAE1215 MS
SAE1215 MS is a low carbon sulfur quick-cutting steel. Its main characteristics are good machinability, suitable for hardware parts, general axis, etc.
The code of each country各國牌號
JIS
Japan
日本 |
SAE/AISI
USA
美國 |
DIN
Germany
德國 |
GB
China
中國 |
CNS
Taiwan
台灣 |
ISO
International Standard
國際標準 |
|
SUM23 |
SAE1215 |
- |
- |
- |
- |
Specification table
SAE1215 MS
Low carbon fast cutting steel
(fast cutting iron) |
Outer diameter specification (mm) |
|
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
|
23 |
24 |
25 |
26 |
27 |
28 |
30 |
32 |
34 |
more |
|
|
|
|
|
|
Brush cutter │Gear box │Grass cutter │Grass timmer │Spare parts │Brush cutter parts │ Brush cutter spare parts │ Gearbox parts │Gearbox prices
|
No. 186-16, Fuxing Rd., Caotun Township, Nantou County 542009, Taiwan (R.O.C.) TEL: 886-49-231-9288
FAX: 886-49-233-3930 E-mail: yusheng.gear@msa.hinet.net
|
|
|
|
|
